9023

Yaskawa Mini Manual

Instructions: Add information that you have to look up in the big manual for customers here.

Note: I think the below is wrong, but it needs to be examined.

To tune out vibrations and oscillations in Yaskawa drives use parameter Pn170. The parameter has four values 11ab. a = the frequency range and can be set between 0 and 4. It is basically a notch filter. b = the load level and can be set between 0 and 2. It is the response magnitude.

Fn204

Needed Addition: a step by step process for getting and using SigmaWin

  1. Download and install SigmaWin+ from the following website:
    1. https://www.yaskawa.com/pycprd/download/search/detail?n=JZSP-WP002
  2. Connect drive and computer via tuning cable
  3. Open SigmaWin
  4. Click "search" to search for the connected drive

Access Alarm History:

results matching ""

    No results matching ""