7621

Control Beeping

Description of the problem:

Control is beeping.

Solution:

If a control is beeping it is probably due to a hardware failure in the memory or motherboard.

To test:

1. Unplug all cables other than power and monitor
2. Turn and hold the key for 10 seconds
3. Unplug the control and wait 30 minutes

If the control is still beeping it could be due to metal dust shorting something out internally.

1. Remove the computer from the control enclosure
2. Open it up
3. Blow it out with clean, dry air
4. Try turning it on again

If the control still does not start there is a failure