10612

1000 Series Mach4 Aux Button Setup

On the 1000 Series control, there are six user auxiliary buttons that can be configured.

To configure the buttons, select the "Settings" tab the lower right of the screen and then press "Screen Configuration."

Each button can be configured to activate a given output signal from the drop-down menu. The user can change the button text in both on and off states. The button could also be defined as momentary or toggle. The defined output signal must be enabled and mapped to a device in Mach settings.

When finished, press "Save" then "Exit" and restart the software for the changes to take effect.

results matching ""

    No results matching ""