7723

Spindle Brake Setup

Description of the problem:

I'm trying to set up my spindle brake.

Solution:

To enable spindle brake:

1. Go to Config->Config Plugins

2. Click on the CONFIG button on the MachMotion plugin

For MachMotion Plugin V4 and earlier:

1. Press the System Configuration Button

2. Check "Enable Spindle Brake (Output #19)"

3. Select [Save] and close out the windows

For MachMotion Plugin V5 and later:

1. Go to the Special Functions tab

2. Check "Enable Spindle Brake (Output #19)"

3. Select [Save] and close out the windows

Note: You will need to configure Output19 in Config->Ports& Pins->Output Signals to the output you are using for the brake.